DIY Guide: How to Make Fryd Live Resin Without Expensive Equipment

DIY Guide: How to Make Fryd Live Resin Without Expensive Equipment 1

DIY Guide: How to Make Fryd Live Resin Without Expensive Equipment 2

What is Fryd Live Resin?

Fryd live resin is a type of cannabis concentrate that has become increasingly popular among cannabis users. It contains a high concentration of cannabinoids and terpenes, making it more potent than regular cannabis. Unlike other concentrates, Fryd Live Resin is made from fresh cannabis buds that are frozen immediately after harvest.

Ingredients Needed for Making Fryd Live Resin

Making Fryd live resin is a relatively simple process that does not require expensive equipment. Here are the things that you will need:

  • Fresh Cannabis Buds: You will need 1-2 oz of fresh cannabis buds for every gram of live resin you want to make.
  • Butane: It is a solvent that is used to extract cannabinoids and terpenes from cannabis buds. You can buy butane from any hardware store or online.
  • Slow Cooker: A slow cooker is needed to purge butane from the cannabis extracts. You can use any slow cooker you have at home.
  • Pyrex Pie Plate or Dishes: These are used to hold the extracted cannabis oil and purge it of butane.
  • Thick Rubber Gloves: They are necessary to protect the skin from frostbite while handling frozen buds during the extraction process.
  • Sharp Knife: A sharp knife is required to chop the cannabis buds into fine pieces.
  • Wax Paper: You will need wax paper to line the pyrex dish before pouring extracted oil into it.
  • Stove: A stove is necessary for the purging process.
  • Step-by-Step Guide to Making Fryd Live Resin

    Here’s a step-by-step guide to help you make Fryd live resin at home:

    Step 1: Freeze the Cannabis Buds

    The first step of making Fryd live resin is to freeze the fresh cannabis buds as soon as you have harvested them. Freezing the buds preserves the terpenes and cannabinoids, which are essential components of live resin. Leave the buds in the freezer for at least 24 hours before the extraction process.

    Step 2: Making Cannabis Extracts Using Butane

    The second step involves using butane to extract cannabinoids and terpenes from the frozen cannabis buds. Follow these simple steps to do it:

  • Put your fresh, dried buds in the freezer for 20-30 minutes.
  • Once the buds are frozen and still really cold, grind them all up very finely.
  • Place the ground buds in a glass container that will store the butane-extracted oil later on.
  • Get your butane canister and hold it upside down over the container of buds.
  • Spray the butane over the buds until the container is about ¾ full of liquid.
  • Wait about five minutes for the liquid butane to fully seep through the buds.
  • Remove the liquid from the container without damaging the buds and let the liquid evaporate completely outside until the oil is all that remains.
  • The oil is now ready to be smoked as-is or added onto a bowl and smoked.
  • Step 3: Purge the Extracted Oil of Butane

    The third step involves purging the extracted cannabis oil of butane, making it safe for consumption. Follow the steps below closely:

  • Line a Pyrex pie dish or dishes with wax paper.
  • Next, pour the cannabis extract over the wax paper in the Pyrex pie dish.
  • Using a stove, heat the Pyrex pie dish with cannabis extract slowly, to allow the butane to evaporate without burning the cannabis extract.
  • Stir the cannabis extract continuously to facilitate even heating and prevent it from burning.
  • Keep stirring the extract until most of the butane evaporates completely. The extracted oil will become thick and sticky as it purges of butane.
  • Once you’re done with the purging, let the extract cool down completely.
  • Step 4: Store Your Fryd Live Resin

    The last step is to store your Fryd live resin. Here’s how you can do it:

  • Using a silicone scraper, transfer the Fryd Live Resin into a glass jar or container.
  • Label the jar or container with the extraction date to keep track of its freshness.
  • Store the Fryd Live Resin in a cool, dry place away from moisture and sunlight.
  • Your Fryd Live Resin is now ready for use and can last several months if properly stored.
  • Conclusion

    Making Fryd live resin is a simple process that can be done at home without expensive equipment. Remember, safety should always come first, so make sure to follow all the necessary precautions and use protective gear while making Fryd Live Resin. With a little patience and effort, you too can enjoy the potent high and unique flavors of a freshly made Fryd Live Resin. Looking to delve further into the topic? fryd carts online, external content we’ve prepared for you.

    Find out more about the topic in the related links we’ve chosen:

    Check out this external content

    Delve into this related study

    Get informed