DIY Installation of Marble Wallpaper: Tips and Tricks

Choosing the Right Wallpaper

Before you start your DIY project, you must choose the right wallpaper. Marble wallpaper can come in a variety of finishes and colors. Depending on the room you are decorating, you must choose the right one. A wallpaper with a high gloss finish may not be the best option for a room with minimal natural light since it may reflect too much light and cause a glare. Similarly, a wallpaper with a dark pattern may not be ideal for a small room as it may make the room feel even smaller. Discover additional information and new viewpoints on the subject by checking out this external resource we’ve chosen for you. Marble Wallpaper https://www.wallartsonline.Com/product-category/wallpapers/marble-peel-and-stick-wallpapers/, enrich your understanding of the topic discussed in the article.

Preparation

Preparing the surface for the wallpaper is crucial for a successful installation. Make sure the wall is clean, dry, and smooth. If the surface is not smooth, there may be air pockets trapped between the wallpaper and the wall, leading to bubbles or wrinkles. You can fix small holes and cracks with spackle or drywall compound. If the wall is already painted, make sure to sand it lightly to create a rough texture that will help the wallpaper adhere better.

Tools and Materials

Before you start the installation process, make sure to gather all the necessary tools and materials. Some essential tools include a tape measure, a level, a smoothing tool, a sharp utility knife, and a wallpaper brush. As for the materials, you will need wallpaper adhesive, a water tray, a sponge, and of course, the wallpaper.

Make sure you read the instructions on the wallpaper roll, as different brands may have specific requirements for installation.

Use a wallpaper calculator to determine how many rolls you need to buy.

Remember to buy extra wallpaper to make up for any miscalculations or future repairs.

Cutting and Installing the Wallpaper

Measure the height of the wall and cut the wallpaper accordingly, leaving an extra few inches at the top and bottom to make sure the wallpaper covers the entire surface. Apply the wallpaper adhesive to the back of the wallpaper, following the manufacturer’s instructions.

Position the wallpaper at the top of the wall, making sure it is straight and flush with the ceiling.

Use a wallpaper brush or a smoothing tool to remove any air pockets and wrinkles as you slowly unroll the wallpaper down the wall.

Wait a few minutes before you start the next panel to make sure the adhesive has time to set.

If you need to make cuts around windows or doors, use a sharp utility knife to create a clean cut.

Finishing Touches

Once you have installed all the panels, cut the excess wallpaper at the top and bottom with a sharp knife or scissors. Use a smoothing tool to ensure the wallpaper adheres to the surface.

If you have any air bubbles, use a pin to puncture them and smooth out the area with your fingers.

Clean up any excess adhesive or wallpaper paste with a damp sponge.

Tuck the edges of the wallpaper into the corners and trim any excess.

Wait at least 24 hours before you start decorating the room or moving any furniture back in. This will allow the wallpaper adhesive to dry completely and ensure a long-lasting finish.

Conclusion

DIY installation of marble wallpaper can be a fun and rewarding project with the right preparation and tools. By following these tips and tricks, you can achieve a professional-looking finish at a fraction of the cost of hiring a professional wallpaper installer. With a little patience and attention to detail, your room will have a fresh new look in no time! Wish to know more about the topic? Examine this detailed analysis, a supplementary external resource we’ve put together for you.

Explore other related posts and learn even more:

Read this useful article

View this

Learn from this in-depth material