Easy Steps to Install a Barn Door

Easy Steps to Install a Barn Door 1

Why Choose a Barn Door?

As interior design trends evolve, modernizing homes sometimes requires a rustic touch that can only be achieved with a stylish barn door. Barn doors are known to offer plenty of benefits, such as saved space, stylish look, and easy movement. A good barn door can give your home a new, trendy aesthetic. Plus, it is quite simple to install on your own.

What You Need

  • Tape measure
  • Drill
  • Hinge kit
  • Screwdriver
  • New door handle (optional)
  • Taking Measurements

    Before heading to the store to buy the door kit, it is important to measure the opening where the door is to be installed. Measure the height and width of the opening and round up to the nearest inch. Also, make sure to measure the depth of the jamb to ensure there is enough room for the door to smoothly slide across the opening.

    Door Preparation

    Remove any hardware on the door and use a drill to make holes for the hinges. Install the hinges on the door, leaving some space between the top of the door and the top of the hinge to allow for movement when installed.

    Installation of the Hinge Kit

    After the door has been prepared, attach the hinge kit to the opening. Fix the setting plates at the points of attachment and then screw the studs and track. After that, slide the hanger attachment into the track and the bottom guides into the lower track.

    Mounting the Door

    Position the door onto the track and make sure it hangs straight. Tighten the screws from the top to the bottom. Add a handle or hardware to the door, this is an optional step but can increase the overall look of the door. Finish off by attaching the soft door stops to the top of the track, which will help in the reduction of any slight rolling noise and protect the wall.

    Conclusion

    Installing a barn door is a relatively easy task that anyone can complete with the right tools and knowledge. The process of measuring the door, preparing it, installing the hinge kit and finally mounting the door is simple and straightforward. With a little bit of patience and attention to detail, the process can be accomplished in just a few hours. So why wait? Choose your perfect door and give your home a trendy upgrade! We constantly strive to offer a complete educational journey. Visit this thoughtfully chosen external site to uncover supplementary details on the topic. Read this.

    Complete your reading with the related posts we’ve compiled, aiding you in understanding more about the issue at hand:

    View this additional research

    Easy Steps to Install a Barn Door 2

    Learn more in this informative document